Japanese Reel Model Names Decoded: C3000XG, LT2500S-XH, HG/PG/XG and S/SS Spools Explained
If you have ever browsed a Japanese tackle store online, you have seen model names like C3000XG, 4000MHG, C3000SDHHG or LT2500S-XH. To a Japanese angler these codes read like a spec sheet. To everyone else they look like a password. The good news: once you know the system, you can pick the right version of a reel in about ten seconds, without opening a single spec table.
I have been fishing in Japan for years, mostly the Enshu-nada surf in Shizuoka, and these days I write from the Gold Coast in Australia. The two reels in the photo above are from my own Japanese review of the Shimano 22 Sahara, and the little letters printed on their spools are exactly what this guide is about. Let me decode them for you, first for Shimano, then for Daiwa.
Key points
- The number (2500, 3000, 4000…) is the spool size, not a line rating in pounds
- A leading “C” on Shimano, or a “-C” on Daiwa LT, means a compact body: a bigger spool on a smaller frame
- Letters right after the number describe spool depth: S = shallow, SS = super shallow, M = medium (Shimano), D = deep (Daiwa)
- Gear codes: PG/P = power (slow), none = standard, HG/H = high, XG/XH = extra high
- DH = double handle. The two-digit number in front (23, 25, 26) is the model year
How a Japanese reel name is built
Almost every spinning reel from the two big Japanese makers follows the same pattern:
[model year] [series name] [body] [spool size] [spool depth] [handle] [gear ratio]
Take 23 Vanquish C3000SDHHG. It reads: 2023 model, Vanquish, compact body (C), size 3000 spool, shallow spool (S), double handle (DH), high gear (HG). Once you see it that way, the long string stops being scary. The exact order differs slightly between Shimano and Daiwa, so let us go through each.
The model year prefix
The two digits before the series name are the year the model was launched in Japan: 22 Stella, 23 Vanquish, 24 Twin Power, 25 Saltiga and so on. Japanese anglers always say the year, because a “Stella” from 2014 and one from 2022 are very different reels. When you buy used or from overseas, always check the year, not just the name. If you are curious about what comes next for the flagship, see my piece on what the 27 Stella might bring.
Shimano spinning reel codes
Spool size: the four-digit number
Shimano sizes run 500, 1000, C2000, 2500, C3000, 3000, 4000, C5000 and up into the SW range (6000, 8000, 10000, 14000 and beyond). The number is a size class. A rough rule many Japanese writers use is that the thousands digit matches the nylon line number the spool was originally designed to hold about 150 m of: a 2000 for Japanese nylon No.2, a 3000 for No.3, and so on. Today the real capacity depends on spool depth, which is why the letters after the number matter so much.
C = compact body
A “C” in front of the number means the spool is one size larger than the body. A C3000 uses a 2500-size body with a 3000-size spool. You get a longer-casting, bigger-diameter spool while keeping the reel light and well balanced on a light rod. C2000, C3000 and C5000 are the common ones.
Spool depth: S, SS, SSS and M
- No letter: standard depth spool for that size
- S: shallow spool. Holds less line, so thin PE fills it to the lip without needing backing
- SS and even SSS: super-shallow finesse spools on some light models, for very fine lines
- M: a medium-depth spool, between S and standard. You see it on popular 3000 and 4000 models, for example 3000MHG and 4000MHG
Why would anyone want less line? Because modern PE braid is so strong for its diameter that 150–200 m of fine line is plenty for most shore fishing, and a shallow spool keeps the reel lighter and saves you from filling half the spool with backing.
Gear ratio: PG, no letter, HG, XG
- PG (power gear): low ratio, more cranking power, slower retrieve
- No letter: standard ratio
- HG (high gear): faster retrieve
- XG (extra high gear): the fastest retrieve in the range
The exact numbers vary by reel size, so always read the “retrieve per crank” figure too. As an example, here is part of the official line-up of the Shimano 23 Vanquish, as listed by a Japanese export retailer:
| Model | Gear ratio | Retrieve per crank | PE capacity | Max drag |
|---|---|---|---|---|
| 1000SSSPG | 4.6 | 58 cm | PE 0.3 – 120 m | 3 kg |
| C2000S | 5.1 | 69 cm | PE 0.6 – 150 m | 3 kg |
| C2000SHG | 6.0 | 81 cm | PE 0.6 – 150 m | 3 kg |
| C2500SXG | 6.3 | 87 cm | PE 0.8 – 150 m | 3 kg |
| 2500SHG | 5.8 | 86 cm | PE 0.8 – 150 m | 4 kg |
| C3000SDHHG | 5.8 | 86 cm | PE 0.8 – 150 m | 9 kg |
| C3000MHG | 5.8 | 86 cm | PE 1 – 190 m | 9 kg |
| C3000XG | 6.4 | 94 cm | PE 2 – 200 m | 9 kg |
| 4000MHG | 5.7 | 93 cm | PE 1.5 – 200 m | 11 kg |
| 4000XG | 6.2 | 101 cm | PE 2 – 240 m | 11 kg |
Look at the three C3000 versions. Same body, same size number, but the SDHHG holds PE 0.8, the MHG holds PE 1 and the standard-depth XG holds PE 2. That is the whole system in one table: the size number tells you the frame and spool diameter, the letters tell you the line class and speed. Notice also that C2000S and C2000SHG share the same spool but differ by about 12 cm of line per turn of the handle.
DH and SDH = double handle
DH means a double-knob handle, popular for eging (squid fishing) and some boat work because you can crank smoothly and stop the handle in any position. SDH simply combines a shallow spool (S) with a double handle (DH), as in C3000SDH or C3000SDHHG.
Daiwa LT spinning reel codes
Since 2018 most Daiwa spinning reels follow the LT (Light and Tough) concept, with standardised spool diameters. Daiwa Australia lists the LT sizes like this:
| LT size | 1000 | 2000 | 2500 | 3000 | 4000 | 5000 | 6000 |
|---|---|---|---|---|---|---|---|
| Spool diameter | 40 mm | 42 mm | 45 mm | 48 mm | 51 mm | 54 mm | 57 mm |
A typical name is LT2500S-XH. Read it as: LT concept, 2500 spool, shallow (S), extra high gear (XH).
Spool depth: D, none, S, SS
- D: deep spool, more line capacity
- No letter: standard depth
- S: shallow
- SS: super shallow
The “-C” after the hyphen = compact body
Daiwa puts the compact-body mark after the hyphen instead of in front: LT2500S-C is a 2500 spool on a 2000 body, and LT3000-CXH is a 3000 spool on a 2500 body with extra high gear. It is the same idea as Shimano’s “C3000”, just written differently.
Gear ratio: P, none, H, XH
Japanese guides commonly describe the Daiwa bands roughly as follows. Treat them as a guide and check each model’s spec sheet:
| Code | Meaning | Typical ratio |
|---|---|---|
| P | Power gear | about 4.9 or lower |
| (none) | Standard | about 5.0 – 5.4 |
| H | High gear | about 5.5 – 5.9 |
| XH | Extra high gear | about 6.0 or higher |
DH, FC and QD
- DH after the gear code: double handle, e.g. LT3000S-C-DH
- FC before LT: “Finesse Custom”, an extra-light finesse version, e.g. FC LT2500S
- QD before LT: “Quick Drag”, a drag that can be switched quickly between set and free
Shimano vs Daiwa codes side by side
| What it describes | Shimano | Daiwa LT |
|---|---|---|
| Compact body | C in front (C3000) | -C after hyphen (LT3000-C) |
| Shallow spool | S (2500S) | S (LT2500S) |
| Very shallow spool | SS / SSS on some models | SS |
| Medium spool | M (4000M) | – |
| Deep spool | standard (no letter) | D |
| Low gear | PG | P |
| High gear | HG | H |
| Extra high gear | XG | XH |
| Double handle | DH | DH |
Size numbers do not line up perfectly between the brands either. A Shimano C3000 and a Daiwa LT2500 often end up in very similar roles. For a deeper comparison of the two makers, see Shimano vs Daiwa spinning reels.
Baitcasting reel codes in one minute
- The size number (70, 100, 150, 200, 300) is the frame/spool size class
- HG and XG mean the same as on spinning reels; Daiwa baitcasters often use H/XH or HL/XHL
- LEFT (Shimano) or L (Daiwa) means a left-hand retrieve; no mark usually means right-hand
- Extra letters such as DC, SV, TW, BFS or MD are technology or series names, not size codes
Which code should you buy?
| Fishing style | Typical Japanese choice | Why |
|---|---|---|
| Ajing / mebaru (light jig head) | Shimano 500-C2000S, Daiwa LT1000S-LT2000S | Light, shallow spool for PE 0.2-0.4 or fine mono |
| Eging (squid) | Shimano C3000S or SDH, Daiwa LT2500S or LT3000S-C(-DH) | PE 0.6-0.8 on a shallow spool, often double handle |
| Seabass, light shore jigging | Shimano C3000 / 4000M HG or XG, Daiwa LT3000-CXH / LT4000-CXH | PE 1-1.5, fast pick-up of slack |
| Surf flounder and yellowtail | Shimano 4000MHG / 4000XG, Daiwa LT4000-CXH / LT5000-CXH | PE 1-1.5 with enough capacity for long casts |
For light game specifically, I compared the current line-ups in the best 2000-size ajing reels. For a heavier saltwater view, Certate vs Certate SW vs Saltiga shows how the size numbers scale up.
PE line numbers on the spec sheet
Japanese spec sheets list capacity like “PE 0.8 – 150 m” or “nylon No.3 – 150 m”. These are Japanese line sizes (“go”), not pound ratings. PE 0.8 is roughly 14-16 lb in most brands, PE 1.5 roughly 25 lb, but it varies by manufacturer. I keep a full conversion in my PE line and leader chart.
FAQ
Is a C3000 the same as a 2500?
Same body, different spool. The C3000 has a larger-diameter 3000 spool on a 2500 frame, so it casts a little further and picks up more line per turn, with almost no weight penalty.
Is HG or XG better?
Neither is better. XG gathers slack faster and suits jigging, drifting lures in current and fast surf retrieves. HG is a good all-rounder. PG is easier for slow presentations and lures with strong resistance.
Do overseas versions use the same codes?
Increasingly yes. Shimano and Daiwa use similar or identical codes in many export markets, but line-ups and spool options can differ by country. Always compare the full code and spec sheet, not just the series name.
What does “LT” mean on a Daiwa?
Light and Tough, Daiwa’s design concept for compact, strong spinning reels with standardised spool sizes. It is part of the model name rather than a size code.
Summary
- Number = spool size class; C (Shimano) or -C (Daiwa) = bigger spool on a smaller body
- S, SS, M and D describe spool depth, which decides your line class
- PG/P, standard, HG/H, XG/XH describe retrieve speed
- DH = double handle; the leading two digits = model year
- Always confirm with the spec table: same size number can mean PE 0.8 or PE 2
